PYLE Audio PLD71MU - Manual (Page 21)

Radio Operation
-20-
MODE
SEL VOLUME+ VOLUME-
MUTE ON
FM1 87.60
MHZ
1 2 3 4 5 6
FLAT
NO-DISC
12:06
DX ST
Touch to preset station
Scan Function
In Radio mode, briefly touch the
section on the touch screen ,
the radio briefly plays all the
APS
preset stations of the frequency band .
APS
RDS FUNCTION
In Radio mode, touch it to select
the desired item, it will display the
following as below :
S-WOOFER
FM1 87.60
MHZ
APS
STEREO/MONO
FLAT
NO-DISC
12:06
DX ST
DSP
AF
PTY BND
AF TA LUD CLK LOC/DX
TA Traffic Announcement
(Priority For Traffic Information)
In Radio mode, touch briefly the
screen of
range to activate
the TA function.
“TA”
Touch it again to turn off the TA function .
When the TA function is activated, the
TA symbol appears in the display .
During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .
If an FM station is being received which
transmits the latest traffic announce-
ments from time to time, the TP display
lights up.
TA
Storing Stations In Memory
Touch the screen of the sections “ 1-6 ”
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
-Retrieve a preset station
1-6 sections Touch the briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
-Store in Memory
>
Select the frequency band
> Select the station
> Keep the desired memory key pressed
in until the station is heard again after a
brief interruption .
e.g. FM1, for the stronger signal
level until the search cycle has finished .
The six strongest stations are then
allocated to the corresponding storage
locations . Then the station of the first
storage location is set .
Automatic Memory Storing &
Program Scanning
Automatic Preset Setup
In Radio Mode, Touch and keep the
APS section on the touch screen
for about 2 seconds to active
APS
automatic station storage. The radio
searches within the current frequency
band,