PYLE Audio PLD71MU - Manual (Page 29)

Setup
-28-
USING THE MENU
TV Display
Angle Mar k
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
DOLBY
....GENERAL SETUP PAGE....
Set TV Display Mode
TV Display
Nor mal/PS
Nor mal/LB
W ide
Nor mal/LB
GENERAL SETUP
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Select when a wide-screen TV set is
connected.
Normal/PS (For 4:3 TV)
Normal/LB (For 4:3 TV)
Wide (For 16:9 TV)
16:9 4:3 Letter Box
4:3 Pan Scan
TV Display
Angle Mar k
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
LB
ON
ENG
SPDIF/RAW
ON
ON
ON
DOLBY
....GENERAL SETUP PAGE....
Go To General Setup Page
Overview Of The Main Menu
DOLBY
( )
1
( )
2
( )
3
( )
4
(1) General Settings
(2) Speaker Settings
(3) DOLBY Digital Settings
(4) Preference Settings
TV Setting
OK
Enter Up Down Left Right Previous
Touch to select
The Following Buttons For Entering
The Selection .
The buttons of the left and right are for
selection of setting type .
The buttons of the up and down are for
selection of the setting program .
1. Touch the screen of range
or press the button on remote .
2.The SETUP menu is displayed.
3.Select the preferred item by touch the
/ / / range on the screen
or by using the / / / buttons .
4.Touch screen of the range or
Press on the remote to confirm .
“ SETUP ”
SETUP
“ OK ”
ENTER