Pitney Bowes 9K0U - Manual (Page 27)

4-3
Integra ™ Model 9K0U Scale Operator Guide
4
SV61955 Rev. A Integra ™ Platform Scale 9K0U Operator Guide
Using the Scale to
Count Like Parts
Notes:
1.
Scale must be
at zero weight
before selecting
Manual Weight
Entry.
2.
The Manual
Weight feature
is limited to the
maximum the
scale will weigh
(as indicated by
the capacity on
the front of the
scale.)
Generating
Multiple Tapes
(Not in menu list)
Follow the steps below to enter weight manually:
1. Select Manual Weight Entry.
2. When prompted, enter the weight. The numbers display
from right to left as on a calculator. For example:
• For 4 lb. 2 oz. enter 4 0 2 0; press Enter.
• For 3 lb. 2.5 oz., enter 3 0 2 5; press Enter.
The scale returns to the ready mode.
3. Select a class. The postage amount displays.
4. Add fees as necessary.
5. Transfer postage to the meter.
6. Generate a tape or print a tape strip.
7. Press the Zero key to exit manual weight mode.
With weight on the scale:
1. Select a class and apply fees if desired.
2. Type the number of tapes you want to print. Do not press
enter. If you do, the scale interprets the number you typed
as additional postage.
3. Press the Tape key. The meter sets and the mailing ma-
chine begins printing tapes.
With the Parts Count function, you can obtain a count of like
items based on the weight of a known quantity of those items.
The weight of the known quanity should be at least 2 ounces.
Depending on the shape and quantity of the parts you are
weighing, you may need to place them in a container. You can
deduct the weight of the container, and count and weigh the
parts at the same time. If you are not using a container, start
with Step 2 below.
1. Place an empty container on the scale. (The container
must weigh less than 7 lb. for 9K0U.)
2. Press the Scale Functions key and select Parts Count
from the menu. The scale re-zeros and prompts you to
place a counted sample on the scale.