Pitney Bowes 9K0U - Manual (Page 30)

4-6
Chapter 4: Beyond the Basics
Integra ™ Platform Scale 9K0U Operator Guide SV61955 Rev. A
The weight hold feature is useful when weighing large enve-
lopes that block the display, if the keyboard-display module
is located near the platform and being blocked. This feature
retains the weight reading for a brief time after you remove
an item from the scale. It allows you to continue selecting
class and fees even though the item is no longer on the scale.
Pressing any key (for example, to select a class or fee) other
than zero extends the weight hold time for that transaction.
You may activate weight hold mode in two ways: manually
with the Scale Functions key or automatically through setup.
To use the manual weight hold feature (for one transac-
tion):
1. Use one of the following methods (with no weight on the
scale):
Method Result
Press the Weight Hold key (G). W
H
displays to the right of the
weight field.
Press the Scale Functions key
and select Weight Hold from
the list of features. Same.
2. Place a mailpiece on the scale and wait two seconds to
make sure the weight registers before removing it.
Result:
The weight reading is retained for a brief period.
3. Select the class and any desired fees. (Any key press
other than zero extends the weight hold time for that trans-
action.)
4. When finished with your selections, transfer postage to the
meter in the usual way.
To exit manual weight hold, wait a few seconds until the hold
feature times out or press Zero or, to cancel the entire transac-
tion, press CE/C.
Using the
Weight Hold
Feature