Planar PDP 42 - Manual (Page 15)

1 5
If remote controller does not work
1. Check the polarity (+,-) of the batteries in the remote controller.
2. Check that the batteries have power.
3. Check that the PDP is powered and that it is properly plugged in.
4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP.
How to use remote controller
Inserting batteries into remote controller
1. Firmly press the part on the
cover and slide the cover in the
direction indicated by the arrow.
2. Insert the batteries, making sure that
the polarities are correct.
3. Close the cover.
CAUTION : Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the national code (Recycling program).
The remote controller should be operated within 30 feet (7m) and 30 to the left and the right of
the IR receiver on the front of the PDP.
Used batteries should be disposed properly.