Planar PDP 42 - Manual (Page 2)

Power Supply - Caution
Power Supply - Warning
Power Supply - Warning
2
Safety precautions
Do not use damaged electric cord/
plug, or loose outlet.
It can cause an electric shock or a fire.
Do not use multiple devices in an
outlet at the same time to avoid the
overload.
It may cause a fire due to overheating
from the outlet.
Fully insert the plug into the outlet.
If the connection is unstable, it may c a u s e
a fire.
AC plug should not be touched
with wet hands. It may cause an
electric shock.
It can cause an electrical shock.
Be sure to ground the PDP power
source.
It may cause an electric shock if it has a
failure or electrical leakage. Only use
the proper power cord supplied with
PDP and connect it to an outlet with a
ground terminal.
Be careful not to forcibly bend the
electric cords or press them with a
heavy object.
It may cause an electric shock or a
fire.
When unplugging the AC cord, pull
out by holding the plug itself and
not by pulling on the cord.
If the power cord is damaged. it may cause
a fire.
This manual describes how to operate
the PDP properly and safely. Please
read this manual carefully. This manual
should be retained for future reference.