Planar PDP 42 - Manual (Page 4)

Usage and Maintenance - Caution
Usage and Maintenance - W a r n i n g
4
Safety precautions
Do not insert any foreign
objects such as wires and
drills into the PDP ventilation
slots or the A/V terminal.
It may cause an electric
shock or a fire.
Do not allow children to
play with the PDP.
It may falls or flip over and
may cause serious injury.
Never attempt to disas-
semble, repair or modify
the PDP.
It may cause an electric
shock or a fire. If it requires
repair, contact your dealer.
During a thunderstorm,
u nplug th e power cord
a nd n ever tou ch t he
antenna cable.
It can cause an electri c
shock or a fire.
Unplug the PDP if you do
not intend to use it for a
long time. The generation
of heat, insulation degrada-
tion or the accumulation of
dust may cause an electric
f i r e . When removing the batter-
ies in the remote control,
please place the batteries
in a location out of chil-
dren's reach . It must be
disposed properly.
The plugs and connectors
must be free of dust or
water before use. It may
cause an electric shock or
a fire. When transporting the PDP,
at least two people should
carry it. If it is dropped, seri-
ous injury may occur. To clean the interior of the
PDP, contact your dealer for
service. A fire or failure may
occur, if it is not cleaned.
When moving the PDP, turn off
the power switch and unplug the
power cord from the outlet. Make
sure that the external connection
cords are unplugged (such as
antenna cable and input cables)
prior to moving.
The electrical cords may get
damaged and cause an electric
shock or a fire.
When cleaning the PDP,
unplug the electric cord
and wipe with a soft and
dry cloth. Never clean with
chemicals such as industri-
al glaze, wax, benzene,
alcohol, thinner, aromatic,
lubricant, detergent, or a
damp cloth.
If the PDP is emitting smoke
or an unusual smell, immedi-
ately turn off the power and
unplug the power cord.
It may cause an electric shock
or a fire. Contact your dealer
for the service.