Pride Mobility SC3450 User Manual

Page 27

Advertising
background image

27

Revo

V I I . O P E R A T I O N

BEFORE GETTING ONTO YOUR REVO

n Have you fully charged the batteries? See VI. “Batteries and Charging.”

n Is the manual freewheel lever in the drive (down) position? Never leave the manual freewheel lever pulled up

unless you are manually pushing your Revo.

GETTING ONTO YOUR REVO

1. Make certain that the key is removed from the key switch.

2. Stand at the side of your Revo.

3. Pull up on the seat lock lever and rotate the seat until it is facing you.

4. Make certain that the seat is locked securely in position.

5. Position yourself comfortably and securely in the seat.

6. Pull up on the seat lock lever and rotate the seat until you are facing forward.

7. Make certain that the seat is locked securely in position.

8. Make certain that your feet are safely on the floorboard.

PRE-RIDE ADJUSTMENTS AND CHECKS

n Are you positioned comfortably in the seat? See “Getting On Your Revo,” above.

n Is the seat at the proper height? See VIII. “ Comfort Adjustments.”

n Is the seat locked securely in place? See VIII. “Comfort Adjustments.”

n Is the tiller handle at a comfortable setting and locked securely in place? See VIII. “Comfort Adjustments.”

n Is the key fully inserted into the key switch? See V. “Your Revo.”

n Does the Revo’s horn work properly?

n Is your proposed path clear of people, pets, and obstacles?

n Have you planned your route to avoid adverse terrain and as many inclines as possible?

OPERATING YOUR REVO

After planning your route:

n Set the speed adjustment dial to your desired speed.

n Press your thumb against the appropriate throttle control lever.

n The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the

speed you preselected with the speed adjustment dial.

WHETHER YOU ARE DRIVING FORWARD OR IN REVERSE

n Pull on the left handgrip to steer your scooter to the left.

n Pull on the right handgrip to steer your scooter to the right.

n Move the tiller to the center position to drive straight ahead.

n Release the throttle control lever to decelerate and come to a complete stop.

n The electromechanical disc park brake automatically engages when your scooter comes to a stop.

WARNING! Never leave the manual freewheel lever pulled up unless you are manually

pushing your scooter.

WARNING! Never attempt to board or exit your scooter without first removing the key

from the key switch. This will prevent the scooter from moving if accidental throttle

control lever contact is made.

Advertising