Pioneer PDV-10 - Manual (Page 71)

71
En
ADV
ANCED OPERA
TIONS
English
Various Video Settings
Moving the position of the on-screen display
Set the position of the on-screen display according to the TV type. Switch the
setup screen to the “Expert” mode before making this setting. (Page 62)
• Wide: Set this to prevent the on-
screen display messages from being
partially off the picture when zoom is
selected with a wide screen TV.
• Normal: Select this position when
“Normal” or “Full” is selected with a
wide screen TV.
Settings: Wide
Normal*
*Factory setting
Setting the picture quality
Set the desired picture quality.
• Cinema: In this mode the black
portions of the picture are expressed
clearly.
• Animation: In this mode the colors
are expressed vividly.
• Standard: This is the standard picture
mode.
This setting can be changed during
playback.
Settings: Cinema
Animation
Standard*
*Factory setting
Audio1 General Language Other Video 2
Move Exit SETUP
TV Screen –
Picture Quality –
Still Picture –
On Screnn Display –
Angle Indicator –
OSD Position
16:9 (Wide)
Standard
Auto
On
Wide
Normal
Audio1 General Language Other Video 2
Move Exit SETUP
TV Screen –
Picture Quality
16:9 (Wide)
Cinema
Animation
Standard
i Adjust picture quality