Panasonic KX-TG9391 - Manual (Page 25)

Programming
25 For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods:
– scrolling through the display menus (page 25)
– using the direct commands (page 28)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1 { MENU}
2 Proceed with the operation for your unit.
Base unit: Press {V}, {^}, {7}, or {8} to select the desired main menu. i {SELECT}
Handset: Press {V}, {^}, {<}, or {>} to select the desired menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press { ■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L See page 28 for the default settings.
Base unit
: Base unit / Y Handset
Main menu Sub-menu 1 Sub-menu 2 Page
View Caller ID – – 33
Phonebook – – 22
Set answering Record greeting Line1&Line2 36
Line1
Line2
Play greeting Line1&Line2 37
Line1
Line2
Ring count
*1 – 41
Recording time
*1 – 41
Remote code
*1
– 39
Call screening – 36
TG9391.book Page 25 Tuesday, July 8, 2008 8:01 AM