Promise Technology FastTrak TX4000 User Manual
Page 17
Chapter 2: Quick Start
13
Source Disk
Channel: Drive ID Drive Model
Capacity (MB)
Target Disk
Channel: Drive ID Drive Model
Capacity (MB)
[Please Select A Source Disk]
Channel: Drive ID
Drive Model
Capacity (MB)
1 :
1
QUANTUMCR8.4A
8063
3 :
3
QUANTUMCR8.4A
8063
[
↑
] Up [
↓
] [ESC] Exit [Ctrl-Y] Save
4.
Press the arrow keys to choose which drive contains the existing data to be
copied.
5.
Press Ctrl-Y to Save selection and start duplication. The following progress
screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6.
Select Y to continue. If you choose N, you will be returned to step 1.
7.
Once complete, the following screen will appear confirming that your
Security array has been created. Press any key to reboot the system.
Array has been created.
<Press Any Key to Reboot>
8.
Proceed to Chapter 4: Installing Drivers to install the FastTrak TX4000
driver and/or operating system.