Promise Technology FastTrak TX4000 User Manual
Page 30
FastTrak TX4000 User Manual
26
Source Disk
Channel: Drive ID
Drive Model
Capacity (MB)
Target Disk
Channel: Drive ID
Drive Model
Capacity (MB)
[Please Select A Source Disk]
Channel: Drive ID
Drive Model
Capacity (MB)
1 :
1
QUANTUMCR8.4A
8063
3 :
3
QUANTUMCR8.4A
8063
[
↑
] Up [
↓
] [ESC] Exit [Ctrl-Y] Save
4.
Press the arrow keys to choose which drive contains the existing data to be
copied.
Warning
All target drive data will be erased. Make sure you choose
the correct drive.
5.
Press Ctrl-Y to Save selection and start duplication. The following
confirmation screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6.
Select Y to continue. If you choose N, you will be returned to step 1.
7.
Once you select Y, the following progress screen will appear. The process
will take a few minutes.
Please Wait While Duplicating The Image
10%
Complete
Once mirroring is complete, the following screen will appear confirming that
your Security array has been created.
Array has been created.
<Press Any Key to Reboot>
8.
Press any key to reboot the system.