Panasonic SA-XR58 - Manual (Page 20)

ENGLISH
RQTV0156
20
Playback options
Playback options
AUTO SPEAKER SETUP ADVANCED DUAL AMP BI-AMP
SPEAKERS A B
AUTO DETECTOR
SURROUND
AUX SETUP MIC
MENU SETUP
RETURN
INPUT SELECTOR
ENTER
VOLUME
HDMI
TUNE
S VIDEO IN VIDEO IN L AUDIO IN R
SPEAKERS
[BI-AMP]
B A
ADVANCED
DUAL AMP
ONE
TOUCH PLAY
�
D
IR
EC
T
N
AV
IG
AT
O
R
T O
P
M
E N U �
FU
N
C
T IO
N
S
0
RECEIVER
AV
SYSTEM
TV
RECORDER
DVD
PLAYER
ANALOG 6CH
VCR CD
TUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT DVD RECORDER MANUAL SKIP
ENTER
SUB MENU RETURN
OFF
SUBWOOFER TV
LEVEL EFFECT VOL
NEO : 6
SFC
MUSIC MOVIE MUTING
TV/AV
DISC
-/--
TEST
DIMMER
AUTO
DVD
Using
SPEAKERS B
To use the speakers
connected to the FRONT B
terminals.
Press
Sound will be stereo from SPEAKERS B.
If you have only SPEAKERS B on and the input signal is multi-
channel, the signal is down-mixed and “2CH MIX” appears on the
display.
To turn off sound from SPEAKERS A, press [SPEAKERS A] so “ ”
goes off.
Note that if you are using DVD 6CH input (below), only the sound for
the front speakers is output.
Speaker settings (
➡
page 27) are fixed as follows when you have only
SPEAKERS B on.
Speaker size: LARGE
Subwoofer: NO (bass is output from the front speakers.)
•
•
•
•
•
ADVANCED
DUAL AMP
The Advanced Dual Amp activates automatically. In stereo sources or
in 5.1 channel, the unused surround back speakers amplifiers drive the
front speakers for a clearer, purer sound.
[ADVANCED DUAL AMP]
lights when the function is
on.
You can turn this function off
(
➡
page 29).
•
•
BI-AMP
The bi-amp activates if you
have bi-wired your front
speakers and play analogue or
stereo PCM sources.
The amplifiers for the front and
surround speakers separately
run the low frequency and high
frequency. You can use this
feature in combination with the
Advanced Dual Amp (
➡
above)
for an even clearer and purer
stereo sound.
Preparation
Bi-wire your front speakers (
➡
page
13).
Make sure you have selected “YES”
for the “LR BI-WIRE setting” ( ➡ page
27).
Turn the SURROUND mode off
(
➡
page 18).
•
•
•
[BI-AMP] lights when the
function is on.
To make bi-amp settings
(
➡
page 28).
You cannot use the bi-amp if you
are using DVD 6CH input
(
➡ below).
•
•
Playing DVD-
Audio
Digital
Connect your DVD equipment with an HDMI cable (
➡
page 5) or with a
coaxial cable through the DIGITAL IN COAXIAL 1 terminal (
➡
pages 6
and 7).
DVD analogue 6CH
Connect through the DVD 6CH IN
terminals ( ➡ page 8).
Switch on SPEAKERS A or BI-WIRE.
Select “DVD” as input (
➡
page 18).
Press and hold until
“DVD 6CH” appears on the display.
To cancel, press and hold until
“DVD” appears on the display.
•
•
•
•
If you are using a DVD
recorder
You cannot switch to DVD
6CH input if “DVR” is the
input source, so connect your
recorder through the DVD 6CH
IN terminals and select “DVD”
as the input source if you want
to listen to DVD-Audio.
“Level” settings ( ➡ pages 14 and
17) made on this unit, except for
subwoofer level, are ineffective.
2-channel analogue
This mode lets you enjoy the high-
quality stereo sound available with
DVD-Audio recorded with a sampling
frequency of 192 kHz.
Cancel “DVD 6CH” if
necessary (
➡
above).
In INPUT MODE, fix input to
analogue (
➡
page 28).
1.
2.
SPEAKERS
B A
Preparation
DVD
PLAYER
ANALOG 6CH
Note
Note
SA-XR58.indb 20 6/27/2006 6:55:09 PM