Panasonic SA-XR58 - Manual (Page 35)

ENGLISH
RQTV0156
To switch the unit’s input
to “DVR” or “DVD”/To
switch the remote control
to the DVD recorder or
DVD player operation
mode
Do this before trying to operate the
DVD recorder.
To confirm selection of
an item
For selecting tracks and
chapters directly
You may have to then
press [ENTER] on some
models.
To pause
Frame-by-frame
To skip ahead 30 seconds
(For DVD recorder only)
To switch the DVD
recorder’s drive (HDD,
disc, and SD) (For DVD
recorder only)
Select the channel (For
DVD recorder only)
To change channels
sequentially
To select a channel
directly
To stop play
DVD recorder/DVD player
To switch the DVD
recorder/DVD player on
or off
To skip a track or chapter
To search through the
disc
Slow-motion
To start play
To show the direct
navigator or top menu
To show sub menus
To show the FUNCTIONS
window (while stopped)
To return to the previous
screen
To navigate through
menus
Use these buttons
to select items after
pressing [DIRECT
NAVIGATOR,
TOP MENU], [S,
SUB MENU], or
[FUNCTIONS].
To specify a disc (5-disc
changer only) (For DVD
player only)
AV
SYSTEM
SKIP
SLOW/SEARCH
PAUSE
SLOW/SEARCH
PLAY
D IR
EC
T
N
AV
IG
AT
O R
T O
P
M
E N U
SUB MENU
FU
N
C
T IO
N
S
RETURN
DVD
PLAYER
ANALOG 6CH
ENTER
0
-/--
PAUSE
PAUSE
MANUAL SKIP
DRIVE SELECT
CH
0
-/--
STOP
Do this before trying to operate the
DVD player.
DIRECT TUNING
DISC
Using the remote control with other equipment
ONE T
OUCH PLAY
DIR
EC
TN
AV
IGA
TO
R
TO
P
M
EN
U
FU
NC
TIO
NS
0
RECEIVER
AV
SYSTEM
TV
RECORDER
DVD
DVD
PLAYER
ANALOG 6CH
VCR CD
TUNER
BAND
CH
VOLUME
DIRECT TUNING
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT DVD RECORDER MANUAL SKIP
ENTER
SUB MENU RETURN
OFF
SUBWOOFER
TEST
TV
LEVEL EFFECT VOL
NEO : 6
SFC
MUSIC MOVIE
DIMMER
MUTING
TV/AV
DISC
-/--
AUTO
RECORDER
DVD
Before using this remote
control with a Panasonic DVD
recorder
You may need to change the
code in the remote control to
match the remote control
mode
of the DVD recorder.
Preparation: Check the remote
control mode of your DVD
recorder. Read its operating
instructions for details.
Press [DVD
RECORDER].
While pressing [ENTER],
press and hold [1],
[2], or [3] for about 2
seconds.
The remote control code
switches to 1, 2, or 3,
depending on which
numbered button you
pressed.
The factory setting is “1”.
If you are unable to switch the
drives on the DVD recorder
The DVD recorder is not
responding to the signal from
the remote control.
Do the following to change the
signal, then try switching drives
again.
Press [DVD
RECORDER].
While pressing [ENTER],
press and hold [8] for
about 2 seconds.
To restore the original
signal:
In step 2, while pressing
[ENTER], press and hold [9]
for about 2 seconds.
1.
2.
•
•
1.
2.
[FUNCTIONS] activates display functions on some of the Panasonic DVD players.
35
Point the remote control at the equipment you want to operate.
Note
Using the remote control with other equipment
SA-XR58.indb 35 6/27/2006 6:55:42 PM