Panasonic SA-XR58 - Manual (Page 25)

ENGLISH
RQTV0156
SFC (Sound Field Control)
Use SFC modes to add realism and depth to Dolby Digital, DTS, PCM, and analogue stereo
sources.
(Music)
This mode is effective on music sources.
Press to select one of the following modes
or
You can also press to select the modes after you have pressed
(Live)
Adds reverberation and depth that makes you feel like you were in a
concert hall.
(Pop/rock)
Suitable for pop and rock.
(Vocal)
For adding gloss to vocals.
(Jazz)
Adds the reverberations you would experience in an intimate jazz club.
(Dance)
Adds the echoes and feeling of space you would experience in a dance
hall.
(Party)
This mode uses all available speakers so that sound is in stereo regardless
of the direction you are facing, and is useful at parties where listeners are
spread out.
To cancel, press
(Movie)
Use this mode when playing movies.
Press to select one of the following modes
or
You can also press to select the modes after you have pressed
(Drama)
For dramas and other material where dialogue is important.
(Action)
For action movies and other material where impact is important.
(Sports)
To make you feel like you were in the stadium.
(Musical)
Makes you feel like you are in a theater.
(Game)
Enjoy gaming with more impact.
To cancel, press
In “PARTY” mode, you can only adjust the subwoofer output level ( ➡ page 17).
You can only adjust speakers if you have connected them ( ➡ pages 13, and 14 to 17) and set them as present (“Speaker and size settings”, ➡ page
27).
You may be unable to use some of these surround effects with some sources.
These settings are saved even if you turn the unit off.
You cannot use SFC modes unless you have connected center or surround speakers.
When in
“PARTY” mode and you have connected a single surround back speaker (the left surround back speaker), there will be no sound from
that speaker unless you have also connected a center speaker. Similarly, there will be no sound from your center speaker unless you have also
connected a surround back speaker (the left surround back speaker).
There may be some distortion with some input sources and modes. Reduce the effect level (
➡ above), or choose another mode.
•
•
•
•
•
•
•
Note
Adjusting SFC (Sound Field Control)
Adjusting the output level
Press to select the speaker you want to adjust, then press to adjust the level.
C (center), RS (surround right), SBR (surround back right), SBL (surround back left), (SB when you have connected only one
surround back speaker), LS (surround left)
Adjustment range: -20 dB to +10 dB
Factory setting: 0 dB
SUBW (Subwoofer)
Adjustment range: --- (off), MIN (minimum), 1 to 29, MAX (maximum)
Factory setting: 20
Adjusting the effect level
Press , then press to adjust the level.
Adjustment range: EFFECT 1 (minimum) to EFFECT 10 (maximum)
Factory setting: EFFECT 5
You cannot adjust the effect level in the “PARTY” mode (
➡ page 24).
LEVEL
EFFECT
25
Surround sound
SA-XR58.indb 25 6/27/2006 6:55:18 PM