Connection to a broadband network, Ac power supply cord connection, Step 4: ac power supply cord connection – Panasonic SC BTT268 User Manual
Page 15: Lan cable connection
Getting s
tar
te
d
15
VQT3M40
The following services can be used when this unit is connected
to broadband.
≥ Firmware can be updated (
17)
≥ You can enjoy BD-Live (
21)
≥ You can enjoy VIERA CAST (
29)
For details about connection method, refer to the instructions
supplied with the connected equipment.
STEP 4: AC power
supply cord
connection
Connect only after all other connections are complete.
A AC power supply cord (supplied)
B To a household AC outlet
Main unit
≥ This unit consumes a small amount of AC power, even when
it is turned off. : approx. 0.4 W*
* When the “Quick Start” setting is “Off”
In the interest of power conservation, if you will not be using
this unit for a long time, unplug it from the household AC outlet.
Connection to a broadband
network
∫ LAN cable connection
A LAN Cable (not supplied)
B Broadband router, etc.
C Modem (Broadband) *Provided by ISP
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
LAN
Install this unit so that the power cord can be unplugged from the socket
outlet immediately if any problem occurs.
Main unit
SC-BTT268_P_eng.book 15 ページ ２０１０年１２月１８日 土曜日 午後１時５分