Panasonic SC BTT268 - Manual (Page 38)

38
VQT3M40
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥ Check connections to speakers and other equipment.
( 10s15)
≥ Ensure the speaker settings for your speakers are correct. ( 35)
≥ To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. ( 33)
≥ When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. ( 31)
≥ Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
jIf the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL” terminal. ( 14, 25)
No surround sound.
≥ Press [SURROUND] to select a surround effect. (
19)
Cannot switch audio.
≥ When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to
“PCM”. (
32)
No sound from the TV.
≥ Press [EXT-IN] to select the corresponding source. (
18)
≥ When connecting the unit to a TV using an HDMI cable, check
whether the HDMI terminal on the TV is labeled “HDMI (ARC)”.
If not labeled in this way, connect using the HDMI cable in
combination with an optical digital audio cable.(
12, 13)
≥ If there is no sound from the equipment connected to this
unit’s DIGITAL AUDIO IN terminal, please make sure that
the optical audio output of the equipment is set to PCM.
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. (
27)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
≥ When unexpected operation occurs while using the
iPod/iPhone, connect the iPod/iPhone again or try to restart
the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on the TV.
≥ Make sure that TV is connected to the VIDEO OUT terminal
on this unit. ( 12)
≥ Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI input.
≥ When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[HOME] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. (
11)
A beat sound is heard.
≥ Try to keep a certain amount of distance between the
antenna and the TV.
I can’t connect to the network.
≥ Confirm the network connection and settings. (
15, 17, 34)
≥ Check the operating instructions for each device and
connect accordingly.
BD-Video or DVD-Video is not played.
≥ Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. ( 8)
≥ You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. ( 31)
≥ Some BD-Video can only be output with HDMI.
I cannot play back BD-Live.
≥ The SD card is write-protected. (
9)
≥ Confirm that this unit is connected to the broadband Internet.
( 15)
≥ Confirm the “BD-Live Internet Access” settings. ( 32)
≥ Confirm an SD Card is inserted into the SD Card slot. ( 18)
Alternative soundtrack and subtitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (
20)
Angle cannot be changed.
≥ Angles can only be changed during scenes where different
angles are recorded.
Sound
iPod/iPhone operation
Radio
Network
Other difficulties with playback
SC-BTT268_P_eng.book 38 ページ ２０１０年１２月１７日 金曜日 午前８時５分