Polycom Viewstation MP - Manual (Page 3)

Limitation of Remedies and Damages
Polycom, Inc., its agents, employees, suppliers, dealers and other authorized representatives shall not
be responsible or liable with respect to the product or any other subject matter related thereto under any
contract, negligence, strict liability or other theory for any indirect, incidental, or consequential
damages, including, but not limited to loss of information, business, or profits.
The law of certain states or nations does not permit limitation or exclusion of implied warranties and
consequential damages, so the above limitations, disclaimers, or exclusion may not apply to you. This
warranty gives you special legal rights. You may also have other rights that vary by state and nation.
Important Safeguards
Read and understand the following instructions before using the system:
1. Close supervision is necessary when the system is used by or near children. Do not leave
unattended while in use.
2. Only use electrical extension cords with a current rating at least equal to that of the system.
3. Always disconnect the system from power before cleaning and servicing and when not in use.
4. Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static
free cloth.
5. Do not immerse the system in any liquid or place any liquids on it.
6. Do not disassemble this system (except as instructed in the manufacturer's instructions). To reduce
the risk of shock and to maintain the warranty on the system, a qualified technician must perform
service or repair work.
7. Connect this appliance to a grounded outlet.
8. In case of lightning storms, disconnect the telephone line cord from the system, and only connect
the system to surge protected power outlets.
9. Keep ventilation openings free of any obstructions.
10. SAVE THESE INSTRUCTIONS.
Regulatory Notices
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.