Printer installation, Printer installation -19 – Panasonic DP-C106 User Manual
Page 40
Advertising
Printer Installation
Setting Up the DP-C106
1-19
Printer Installation
Perform this procedure after the Printer is unpacked, and placed in a suitable
location.
If you are installing the 10 Bin Sorter, skip step 1 and go to step 2.
1.
Locate the Output Tray in the cardboard tray removed from the top of
the printer. Install the tray by performing steps a through c.
a.
Standing on the left-hand side of the Printer, hold the Output Tray
as shown.
301031B WOL
0
Do not place the metal spring into the hole. Ensure that the metal spring
extends down against the outside of the cover.
b.
Place the right-hand arm of the tray into the corresponding hole as
shown.
301032B WOL
0
Advertising