Switching the power on, Switching the power on -65 – Panasonic DP-C106 User Manual
Page 86
Advertising
Printing the Test Page
Setting Up the DP-C106
1-65
Switching the Power On
1.
Press the Power Switch to the On (I) position on the Printer.
2.
Press the Power Switch to the On (I) position on the left-hand side of the
Scanner.
0301232A -W O L
The DP-C106 performs a registration setup, then after a few moments
messages indicating the Scanner is ready are displayed on the Printer
Control Panel and on the Scanner Control Panel.
Advertising