Panasonic DP-C106 - Manual (Page 90)

Adding Memory to the Printer Setting Up the DP-C106
1-69
Adding Memory to the Printer
You will need a phillips head screwdriver to perform this procedure.
CAUTION
•
Protect the Memory Card from static electricity by keeping it in the anti-
static bag until you are ready to install it.
•
Handle the card by the top or side edges only. Do not touch the card
components or the gold connector edge.
•
Avoid placing the card near magnetic devices, such as a PC Monitor.
•
Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
1. Switch Off the power to the Printer and to the Scanner.
2. Remove the three screws from the upper right-hand side panel of the
Printer.