Pioneer DataMan 2Serial Communication Tool for Pioneer Industrial DVD Video Player DVD-V7400 - Manual (Page 14)

DataMan2
Operating Instructions
DataMan2_OI_104.doc Page 11 of 35
Note: The pages refer to events. The system supports up to three events per day.
Follow the directions below to create a new Weekly Timer Data file.
1. Click on the Create New Data button from the pop-up menu.
2. Add information to the property sheet.
Use the drop-down selector where available. For fields without a drop-down
selector, highlight the field information and type in the data.
3. Click on the Apply button on the property sheet.
The data is stored in the DVD player’s memory.
4. Click on the Save As button from the pop-up menu.
5. Add the wtd file to the appropriate directory.
3.2 Command Stack / Blackboard Data Transmissions
The Barcode Command Stack/Blackboard feature supports downloading and uploading data
between the PC and the DVD player. Unlike the Weekly Timer function, the Barcode
Command Stack (CS) and the Blackboard (BB) have multiple submenus to activate a range
of settings. Refer to the following sections in this manual for details on these submenus.
The CS/BB data consists of text items only; graphics must be entered using traditional
methods. This text data is available for uploading and downloading rather than editing
specific entries. If text is incorrect or incomplete, delete the entry then type in the text again.