Pioneer DataMan 2Serial Communication Tool for Pioneer Industrial DVD Video Player DVD-V7400 - Manual (Page 20)

DataMan2
Operating Instructions
DataMan2_OI_104.doc Page 17 of 35
5. Input the numerical location values.
Clicking on OK before adding values cause the application to automatically
select Title 1, Start Frame 000001, End Frame 000001, and DispMode Normal.
Note: Display Modes are Normal, Still, Asterick, Astr-Still, Auto, Auto-Still, Prev-Still.
6. Press the OK button on the Add submenu ( Add Prev submenu displayed
above) to eliminate the data from the canvas.
Eliminated data flickers.
Note: Adding or modifying graphics or graphical objects is not possible.
3.2.2 Barcode Command Stack / Blackboard Upload
To upload data to the PC from the DVD player, press the CS/BB Data Upload button
to begin the process. From the Data Upload progress box, click on OK to accept the
uploaded data.
After the data is recalled from the DVD player, the following pop-up window appears
with the current values.
Note: The asterisk in the title bar indicates that the file has been modified or
uploaded. You must save the file to the PC to retain the data.
Comandstack
The Command Stack Data settings are as follows:
•
Num of group – Total number of Barcode command stacks
If no data is present, the number remains as ‘1’.
•
Num of data – the number of commands in that stack/group