Pioneer DataMan 2Serial Communication Tool for Pioneer Industrial DVD Video Player DVD-V7400 - Manual (Page 21)

DataMan2
Operating Instructions
DataMan2_OI_104.doc Page 18 of 35
Pressing the Command stack’s Display data button (column on left) causes the CS
data details window to open. This dialog box is discussed later in this chapter.
Other information pertaining to the Command Stack includes the size of the selected
data (Data size). This monitoring field assists the user to not exceed the available
space on the PC’s hard drive or in the DVD player’s memory.
To view or edit the existing data, click on the Display Data button. The following
window appears.
The left portion of the window shows a comprehensive list of all commands in the
current stack. The right side of the window provides methods to create, change and
delete commands from the stack/group. The colored arrows indicate the edit flow of
a command. A list of actions available for a command is as follows:
•
Copy – move a copy of the command over to the edit portion of the window
•
Replace – replace the original command with the edited version
•
Insert – move the command in another location in the command stack
•
Delete – remove the command from the stack
•
Save As – store a copy of the stack on the PC including blackboard items
•
CSV File Conv – create a file for printing that does not include blackboard items
Note: Under the Edit column on the right of the window provides common commands
as well as a stack closing command, Period of group. It is unnecessary to add this
command at the end of your command stack unless you wish to add a second
stack/group. Eliminating a Period of group command causes two separate groups
to merge in to a single stack/group.
Click on a command from the list on the left then choose an action to apply to that
command. Once the group is altered in any way, the OK button becomes active.
Click on OK to save your changes.