Pioneer KEH-P7020R - Manual (Page 13)

03
Section
Tuner
En 13
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press FUNCTION to select LOCAL .
Press FUNCTION until Local appears in the
display.
2 Press
5 to turn local seek tuning on.
Local seek sensitivity (e.g., Local 2 ) appears in
the display.
3 Press
2 or 3 to set the sensitivity
.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: Local 1 — Local 2 — Local 3 — Local 4
MW/LW: Local 1 — Local 2
The Local 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
4 When you want to return to normal seek
tuning, press
∞ to turn local seek tuning off.
Local :OFF appears in the display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under
PRESET TUNING buttons 1–6 and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the dis-
play.
2 Press
5 to turn
BSM on.
BSM begins to flash. While BSM is flashing the
six strongest broadcast frequencies will be
stored under
PRESET TUNING buttons in order
of their signal strength. When finished, BSM
stops flashing.
• To cancel the storage process, press
∞
.
Note
• Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using
PRESET TUNING .