Perle Systems 5500161-40 - Manual (Page 152)

Serial Port Profiles
152 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0
Rlogin Settings
The Rlogin settings apply when the User Service is set to Rlogin or the Terminal profile has Require
Login selected and specifies an Rlogin connection to a host.
Configure the following parameter:
Terminal Type
When Connect to remote system is selected, the Rlogin window requires the name of the user who
is connecting to the host.
Configure the following parameters:
Terminal Type
User
Escape Defines the escape character. Returns you to the command line mode. This
value is in hexadecimal.
Default: 1d (ASCII value GS )
Type of terminal attached to this serial port; for example, ANSI or WYSE60.
Type of terminal attached to this serial port; for example, ANSI or WYSE60.
This name is passed on to the specified host for the Rlogin session, so that the
user is only prompted for a password.