Perle Systems 5500161-40 - Manual (Page 217)

217
Authentication
Attributes Field Descriptions
Configure the following parameters:
Account Port The port that the RADIUS host listens to for accounting requests.
Default: 1813
Enable Accounting
Authenticator Enables/disables whether or not the IOLAN validates the RADIUS accounting
response.
Default: Enabled
Retry The number of times the IOLAN tries to connect to the RADIUS server before
erroring out.
Range: 0-255
Default: 5
Timeout The time, in seconds, that the IOLAN waits to receive a reply after sending out
a request to a RADIUS accounting or authentication host. If no reply is
received before the timeout period expires, the IOLAN will retry the same host
up to and including the number of retry attempts.
Range: 1-255
Default: 3 seconds
NAS-Identifier This is the string that identifies the Network Address Server (NAS) that is
originating the Access-Request to authenticate a user.
Field Format: Maximum 31 characters, including spaces
Automatically
determine NAS-IP-
Address When enabled, the IOLAN will send the IOLAN’s Ethernet 1 IPv4 address to
the RADIUS server.
Default: Enabled