Planar PX23MW User Manual
Page 11
u
VESA Mount on your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical
Mounting Interface Standard which defines a physical mounting interface
for flat panel monitors, and corresponding standards for flat panel monitor
mounting devices, such as wall and table arms.The VESA mounting
interface is located on the back of your monitor.
The VESA Mounting slots of this model are located inside the rear cover
(shown in the following figure).
To mount the monitor on a swing arm or other mounting fixture, follow
the instruction included with the mounting fixture to be used.
Warning!
Please select the proper screws!
The depth from plastic back cover to the bottom of the screw hole is
8mm.The spec is M4 screw.
Slots
VESA
Mounting
Interface
100mm
100mm
7