Planar PX23MW - Manual (Page 16)

On-Screen Display Menus
12
1. VGA / DVI Input
Main Menu Menu Level 2 Menu Level 3 Function Description
Volume To adjust the sound volume.
Contrast To adjust the contrast of the image
Color
1. To adjust the color temperature.
2. Allows you to adjust the red, green and blue colors of the display.
PIP Mode
1. PIP Mode On/Off.
2. Allows you to select PIP, PAP model.
Source Allows you to select Video, and S-Video
Size Allows you to adjust size of display.
H. Position Allows you to move the horizontal position of the PIP window.
V. Position Allows you to move the vertical position of the PIP window.
Source Allows you to select VGA, DVI, Video, and S-Video model.
Aspect Ratio
Used to size the image being displayed in several different ways.
Native:Displays the incoming image as it is. Full:Resizes the image to fill
the the whole screen. Aspect:Fill to aspect ratio.
Clock
Changes the displays data frequency to match the frequency of your
graphics card. When you experience a vertical flickering bar,use this
function to make an adjustment.
Phase
Synchoronizes the signal timing of the display to that of the graphics
card. When you experience an unstable to flickering image,use this
function to make an adjustment.
H. Position Changes the horizontal position of the image.
V. Position Changes the vertical position of the image.
Language Allows you to choose the OSD menu language.
Time-out To adjust the amount of time the OSD menu is to remain displayed.
H. Position Allows you to move the horizontal position of the OSD window.
V. Position Allows you to move the vertical position of the OSD window.
PIP
Image
OSD
Advanced
Information Display the timing mode.
Reset
To return the display parameters of the current mode to their fatory
default settings.