Panasonic CQ-DX200W - Manual (Page 17)

CQ-DX200W
English
17
The equalizer curve is selectable from among preset 6
types (FLAT, ROCK, POP, VOCAL, JAZZ, and CLUB)
depending on your listening category.
SQ changeover
The SQ category is changed every time [SQ] (SOUND
QUALITY) is pressed.
Note: Setting of SQ, bass/treble and volume are
influenced one another. If the influence mentioned above
causes distortion to the audio signal, readjust bass/treble
or volume. (
a page 34)
SQ is adjustable in accordance with your taste.
1
Press [PUSH SEL: SELECT] to display
the AUDIO menu display.
For using the remote control, use [SEL].
2
Press [PUSH SEL: SELECT] to select
“SQ SET”.
For using the remote control, use [SEL].
3
Adjust each band.
SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz,
200 Hz)
SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz,
18 kHz)
q w : Centre frequency selection
[s] [d] :Band selection
[}] [{] : Level up/down
Note: If [BAND] is held down for 2 sec. or more on
the “SQ ADJUSTMENT” display, the preset data that
is called up can be turned into the default.
4
Hold down the numeric button [2] to [6]
for 2 sec. or more.
The adjusted SQ is preset in the number of the
selected button, and the regular mode resumes.
Notes:
¡ When the SQ preset adjustment is suspended, the
recent adjustment for each level remains until a
new SQ presetting operation is performed or the
SQ preset is called up.
¡ Any SQ presetting value cannot be saved in the
[1] button.
¡ Any SQ adjustments will not change the call-up
screen names such as ROCK and JAZZ.
SQ Selection Based on Genre
(SQ: SOUND QUALITY)
SQ adjustment
(USER)
General