English, Tr oubleshooting, Dvd/vcd usb (mp3/wma) – Panasonic CQ-DX200W User Manual
Page 43
CQ-DX200W
43
English
Tr
oubleshooting
Problem
Possible cause
a
Possible solution
Music is not played
back even if the
USB device is
connected.
The USB device and USB extension cable are not connected correctly.
a
Connect the USB device and USB extension cable correctly.
There is no music stored in a format that is supported on this unit.
a
Check if there is any music data that can be played stored on the USB device.
The file system of the USB device is not compatible with this unit.
a
Use a USB device with a FAT12/16/32 file system.
The current consumption of the USB device exceeds 500 mA.
a
Use a USB device with a current consumption lower than 500 mA.
“READING” is
displayed but
music is not played
back.
A USB hub is connected.
a
Do not use a USB hub.
Too many recorded folders/files exist.
a
When there are too many recorded folders/files, it may take a long time to
read all of the files.
DVD/VCD
USB (MP3/WMA)
No playback or
disc ejected
There is a flaw or foreign objects on the disc.
a
Remove the foreign objects, or use a flawless disc.
The disc has unplayable formatted data.
a
Refer to the description about available disc types.
Sound skipping or
noise
There is a flaw or foreign objects on the disc.
a
Remove the foreign objects, or use a flawless disc.
Sound skipping
due to vibration
The unit is not sufficiently secured.
a
Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
a
Make the angle 30˚ or less.
Disc unejectable
The microcontroller in the unit operates abnormally due to noise or other factors.
a
Unplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
The picture does
not appear on the
monitor.
Cables are not correctly connected.
a
Connect cables correctly.
a
Stop the car and apply the parking brake.
The picture
appears
incorrectly.
The video signal setting of this unit (NTSC/PAL) does not match with the video
signal setting of the connected monitor.
a
Make the same setting between this unit and the monitor.