Panasonic AJ- HD3700B - Manual (Page 30)

– 30 –
Basic operations
∑ Shuttle (SHTL)
(1) The unit is placed in the shuttle mode when the SHTL button is pressed and the lamp
lights.
(2) Turn the search dial.
≥ The tape speed changes depending on the angle by which the
dial is turned.
≥ The tape speed is displayed on the search indicator.
≥ The tape speed can be varied up to a maximum of n 50 times
the normal tape speed.
≥ The maximum speed can be set by pressing the F6 (SHTL
MAX SP) key on the PANEL SET UP menu.
(3) When the STOP, FF, REW, PLAY, JOG, or VAR button is pressed, operation is directly
transferred to the mode that corresponds to the respective button.
∑ Jog
(1) The unit is placed in the JOG mode when the JOG button is pressed and the lamp lights.
(2) Turn the search dial.
≥ When the dial rotation is stopped, the unit is placed in the still-
picture (STILL) mode.
≥ The tape protection mode is established after the still-picture
holding time has elapsed. (This time can be set using the F12
(STILL) key on the HOME SET UP menu and the ADJUST
control.)
≥ The tape speed changes depending on the speed by which the
dial is turned.
≥ The tape speed ranges from j 2 times to i 2 times of the nor-
mal tape speed. In the range from j 1 to i 2 times of the nor-
mal tape speed, the audio signals for all channels are output
from the AUDIO OUT connectors.
(3) When the STOP, FF, REW, PLAY, SHTL, or VAR button is pressed, operation is directly
How to display the ≥ HOME SET UP menu: ≥ PANEL SET UP menu:
menus: # #
F11 SET UP F8 HOME
SHTL
JOG