Pentax K110D - Manual (Page 55)

53
3
B
asic Op
er
atio
ns
3
Press the shutter release button fully.
The picture is taken.
4
Push down on the portion
indicated in the illustration to
retract the flash.
1
Press the K button.
The built-in flash pops up and begins
charging. Manual discharge mode
(Flash ON) is used regardless of flash
mode settings. When the flash is fully
charged,
h appears in the LCD panel
and viewfinder. (p.17, p.20, p.22)
2
Press the shutter release button fully.
The flash discharges and the picture is taken.
3
Push the flash down to retract.
Using Manual Discharge (Flash ON)
h
, j
When Flash mode is set to g or i and
you pop up the built-in flash, you can
switch between Auto discharge mode
and Manual discharge mode (Flash ON)
by pressing the K button under the
following conditions.
• Shooting mode is set to I, =, s,
q , \, or ..
• H mode is set to i, B, C, or E.