Pentax K110D - Manual (Page 94)

92
3
B
asic Op
er
atio
ns
1
Use the four-way controller ( mn) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF settings screen
appears. Use the four-way controller
(
op) to check the number of copies for
each image, whether the date is
imprinted or not, and total number of
copies. Print settings are set with the
Print Service. (p.82)
3
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 and 11 of “Printing Single Images” (p.89 and 90) for
details on how to change the settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
Printing Images Using the DPOF Settings
Disconnecting the USB Cable
1
10 10
Date Date Copies Copies
Total Total
1
10
Date
OK
Copies
Total
Print Print Print
Print w/DPOF settings Print w/DPOF settings Print w/DPOF settings