Pandigital PI1002DW - Manual (Page 44)

44
Windows Vista
1. On the Windows System Tray, click the hardware removal
icon .
2. Click the Safely remove USB mass Storage device message
corresponding with the DPF device drive.
3. When the message “This device can now be safely removed
from the computer” appears, you can disconnect the USB cable
from your computer.
Windows XP
1. On the Windows System Tray, click the hardware removal
icon .
2. Click Remove Hardware Safely .
3. Select the storage device corresponding with the DPF, and then
click Stop to disconnect. A final dialog box opens.
4. Click Close .
5. When the message “It is now Safe to Disconnect Hardware”
appears, you can disconnect the USB cable from your computer.
Connect DPF to Macintosh Computer
1. Use the USB cable (included) to connect the DPF to your
Macintosh computer.
2. Macintosh will recognize the DPF as an external storage device.
3. Drag and drop files between the two devices as you normally
move files.
Disconnect DPF from Macintosh Computer
1. To safely disconnect the DPF from your Macintosh, select DPF’s
icon on your desktop and press Command-e to eject the disk.
2. When the icon is no longer on the desktop, it is safe to unplug
the USB cable.