Pandigital PI1002DW - Manual (Page 46)

46
Set Sleep Mode
The DPF will stay on until you power it off, however, to save power you
can set it to automatically go into a sleep mode when left idle for a
specific amount of time.
1. On the
HOME
screen, press MENU to display the
Setup Menu
.
2. Select
Set Sleep Mode
, and then select the desired setting.
OFF (default) = Power saver is ‘disabled’; DPF will remain on until you power it off
or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the
specified amount of time
3. Select Done .
Set Language
Depending on model, this DPF may include multiple languages for the
user interface display.
1. On the
HOME
screen, press MENU to display the
Setup Menu
.
2. Select
Set Language
, and then select the desired language.
Reset to Factory Defaults
If you have changed function settings, using this feature will restore
settings to the factory pre-set defaults.
1. On the
HOME
screen, press MENU to display the
Setup Menu
.
2. Select Reset to Factory Defaults , and then select Yes to reset, or
No to leave current settings.
3. Press EXIT to return to the
HOME
screen.