Important safety precautions, Cleaning the dpf – Pandigital PI1002DW User Manual
Page 49
49
Important Safety Precautions
Always follow these basic safety precautions when using your
Multimedia Digital Photo Frame (DPF). This will reduce the risk of fire,
electric shock, and injury.
WARNING: Do not expose this product to rain or moisture.
Do not remove the cover. There are no user-serviceable
parts inside. Refer all servicing to qualified personnel.
The DPF is for indoor use only.
Unplug the DPF before performing care and maintenance.
Do not block the ventilation holes on the back of the DPF at any time.
Keep your DPF out of direct sunlight and heat sources.
Protect the power cord. Route power cords so that they are not likely to
be walked on or pinched by items placed on or against them. Pay
particular attention to the point where the cord attaches to the DPF.
Only use the AC adapter included with the DPF. Using any other power
adapter will void your warranty.
Unplug the power cord from the power outlet when the unit is not in use.
Cleaning the DPF
Treat the screen gently, it is made of glass and can break. To clean
fingerprints or dust from the LCD screen, we recommend using a
soft, non-abrasive cloth such as a camera lens cloth to clean the
LCD screen. If you use a commercial LCD Cleaning Kit, do not apply
the cleaning liquid directly to the LCD screen. Clean the LCD screen
with cleaning cloth moistened with the liquid.
Clean the outer surface of the DPF (excluding the screen) and the
remote control with a soft cloth dampened with water.