Pioneer DVR-440H-S - Manual (Page 135)

Additional information 15
135
En
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
The picture freezes and
the front panel and
remote control buttons
stop working • Press STOP then try restarting playback.
• Press the front panel STANDBY/ON button to switch the power
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
STANDBY/ON for 5 seconds until the
power switches off.
Message Explanation/Action
• Initializing disc. Please wait a
moment. When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
• Incompatible region number. The disc loaded has an incompatible region
number for the recorder and so will not play.
• Cannot record any more titles.
• No more space for file management
data. The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
• This disc cannot be recorded. Undo
the finalization. The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to
the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization
successfully.
• Could not undo finalization
successfully.
• Could not successfully unlock the
disc. The disc may be dirty or damaged. Take out the
disc, clean it and retry. If the error persists, use a
new disc. If the error appears even with a new disc,
please consult a Pioneer Service Center.
Problem Remedy
DVR540H_WV_EN.book 135 ページ ２００６年２月１６日 木曜日 午後４時３４分