Timer recording faq, Recording 06 – Pioneer DVR-440H-S User Manual

Page 62

Advertising
background image

Recording

06

62

En

Canceling or extending the timer

1

Press and hold for three seconds

during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been canceled.

2

Press repeatedly to extend

recording in 30 minute blocks.

Stopping a timer recording

1

Press during a timer recording.

2

Select ‘Yes’ to confirm.

Preventing use of the recorder
before a timer recording (child
lock)

You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.

1

If the recorder is on, switch it

into standby.

2

[Front panel]Press and hold for

three seconds to lock the controls.
The front panel display briefly shows

LOCK.

If any buttons are pressed on the remote or
front panel,

LOCK is briefly displayed again.

• To unlock the recorder, press and hold

STOP on the front panel (while the
recorder is stopped) for three seconds
until the display shows

UNLOCK.

Timer recording FAQ

Frequently Asked Questions

• Even though the timer is set, the recorder

doesn’t start recording!

Check that the disc loaded or HDD is
recordable, not locked (see Lock Disc on
page 109), and that there are fewer than
99/999 titles already on the DVD/HDD.

• The recorder won’t let me enter a timer

program! Why not?

You can’t enter a timer program if the
clock isn’t set.

• What happens when two or more timer

programs overlap?

Basically, the program with the earlier
recording start time has priority.
However, the recorder will start
recording the program with the later
start time after the earlier program is
finished. If two programs have the same
times (but different channels, for
example), the program set most recently
takes priority.

If VPS/PDC is active for two timer
programs that are programmed to start
at the same time, then the program that
actually starts first takes priority.

REC

REC

STOP REC

ENTER

STANDBY/ON

06 Recording.fm 62 ページ 2006年2月16日 木曜日 午後7時1分

Advertising
This manual is related to the following products: