Pride Mobility JAZZY 1400 - Manual (Page 26)

26 www.pridemobility.com Jazzy 1400/Rev C/Sept02
V I I I . O P E R A T I O N
JOYSTICK AND CONTROLLER
Your Jazzy is operated by your joystick and controller. The Jazzy 1400 is currently available with one of
two controller options: Remote Plus or Europa Remote. See figures 31 and 32. Refer to the section that
applies to the controller you own.
To operate your Jazzy:
1. Turn the power on (push the on/off key). The battery condition meter lights, indicating the present
charge of your battery.
2. Push the joystick in the direction you wish to move. The further you push the joystick from the neutral
(center) position, the faster your Jazzy 1400 moves.
CONTROLLER FUNCTIONS
The controller translates the speed and the directional information from the joystick to the motors. It has
self-diagnostic features that are designed to search for potential problems at the rate of 100 times per
second. If the controller detects a problem in the wheelchair’s electrical system, the wheelchair may,
depending on the severity of the problem, stop functioning. See “Trouble Codes” in this section.
The controller is designed to maximize user safety under normal operating conditions. This controller,
however, cannot take into account circumstances that put your Jazzy 1400 outside of its normal operating
environment as described within this manual. It is very important that you follow the precautions described
within this manual.
Figure 31. Remote Plus Controller Figure 32. Europa Remote Controller