Pride Mobility JAZZY 1400 - Manual (Page 44)

44 www.pridemobility.com Jazzy 1400/Rev C/Sept02
X I . O P T I O N A L A C C E S S O R I E S
The following accessories are available from your authorised Pride provider.
POSITIONING BELT
NOTE: The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is your Jazzy
1400 suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should be properly belted into
seats approved by the auto manufacturer.
The positioning belt is designed to support the operator’s torso so that he or she does not slide down or
slide forward in the seat. The positioning belt is not designed for use as a restraining device. Make sure the
belt is secure but does not cause discomfort. See figure 42.
Figure 42. Positioning Belt
OXYGEN TANK HOLDER
The removable oxygen tank holder is mounted to the back of the seat by means of the accessory bracket.
See figure 43.
CANE AND CRUTCH HOLDER
The removable cane and crutch holder is mounted to the back of the seat by means of the accessory bracket.
See figure 44.
WALKER HOLDER
The removable walker holder is mounted to the back of the seat by means of the accessory bracket. It can
hold a standard size walker. See figure 45.
REAR BASKET
The rear basket is mounted to the accessory bracket. It has a handle that you can use when you remove the
basket from your Jazzy 1400. See figure 46.
CUP HOLDER (NOT SHOWN)
The cup holder is mounted to the armrest.