Panasonic DMP-BD755 - Manual (Page 11)

C
o
nne
ct
ion
s &
Se
tt
ing
s
11
VQT3A92
The configuration of your network is about to begin.
Follow the on-screen instructions and make
the settings with [3, 4, 2, 1] and press
[OK].
Network Easy Setting
(Home Network Connection Check)
Network Easy Setting (Internet Connection Check)
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. ( 24)
≥ You can redo these settings individually using “Network Settings”.
( 24)
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (
25, “Remote Control Code”)
Network Easy Setting
When you experience
problems with settings
Display
Check the
following
1. LAN cable connection Fail ≥ Connection of
the LAN
cables (
9)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass ≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address/
DNS
Settings”
(
24)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass
2. IP address setting
Pass or
Home
network
available
3. Connection to gateway Fail
OK
RETURN
Network Easy Setting
The confirmation of a network connection and the
Internet functions' (BD-Live etc.) accessibility is
conducted.
Is a LAN cable already connected ?
Please refer to the operating instructions for how
to connect to with a LAN cable.
A broadband Internet connection is necessary for
BD-Live.
Press [OK] to proceed.
OK
Network Easy Setting (Home Network Connection Check)
Yes No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
Fail
Fail
Fail
Display Check the following
Cannot find the
server.
(Error code: B019) ≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address/
DNS Settings” (
24)
Failed to connect to
the server.
(Error code: B020)
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” ( 24) and the router
Reprogramming the remote
control
OK
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
DMP-BD75_VQT3A92_eng.book 11 ページ ２０１０年１２月１３日 月曜日 午前１０時１６分