Panasonic DMP-BD755 - Manual (Page 8)

8
VQT3A92
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the back cover). It is recommended that
you use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft.) or
less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
∫ Via an HDMI AV OUT terminal (High quality) ∫ Via a VIDEO OUT terminal (Standard quality)
≥ Set “HDMI Audio Output” to “On” ( 24).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” ( 20).
≥ Connect terminals of the same color.
LAN
10BASE-T/100BASE-TX
Back of the unit
LAN
-T/100BASE-TX
HDMI IN
HDMI cable
(Only supplied with
DMP-BD755)
LAN
10BASE-T/100BASE-TX
AUDIO IN
R L VIDEO IN
Audio/Video cable
DMP-BD75_VQT3A92_eng.book 8 ページ ２０１１年２月８日 火曜日 午後３時１５分