Picture audio playback network – Panasonic DMP-BD755 User Manual

Page 27

Advertising
background image

Re

fe

re

n

ce

27

VQT3A92

The images from this unit do not appear on

the television.

Picture is distorted.

¾

An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:

1 While the unit is on, press and hold [OK], [B] and [Y] on

the remote control at the same time for more than
5 seconds.
– “00 rEt” is displayed on the unit’s display.

2 Repeatedly press [

1] (right) on the remote control or

[POWER Í/I] on the unit until “04 PrG” is displayed on
the unit’s display.

3 Press and hold [OK] on the remote control or [

< OPEN/

CLOSE] on the unit for at least 4 seconds.
Set the item again. (

24)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD

audio are not output in bitstream, select “Yes” in “Restore
Default Settings” and make proper settings. (

25)

Video is not output in high-definition.

¾

Confirm that “HDMI Resolution” in the Setup menu is set
properly. (

24)

No subtitles.

¾

When progressive output is on, closed captions/subtitles
cannot be displayed.

The subtitles overlap closed captions

recorded on discs.

¾

Turn off the subtitles or turn off the closed caption
setting on the TV. (

21)

A black band is displayed around the edge

of the screen.

The aspect ratio of the screen is abnormal.

¾

Confirm the “TV Aspect” is set properly. (

23)

¾

Adjust the aspect setting on the television.

Cannot hear the desired audio type.

¾

Check the connections and the “Digital Audio Output”
settings. (

9, 23)

¾

To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (

24)

Disc cannot be played.

¾

The disc is dirty. (

4)

Still pictures (JPEG) do not play back

normally.

¾

The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.

I can’t play back BD-Live.

¾

Confirm that this unit is connected to the broadband
Internet. (

9)

¾

Confirm the “BD-Live Internet Access” settings. (

22)

¾

Confirm a USB device is inserted into the USB port.
(

13)

I can’t connect to the network.

¾

Confirm the network connection and settings.
(

9, 11, 24)

¾

Check the operating instructions for each device and
connect accordingly.

Picture

Audio

Playback

Network

DMP-BD75_VQT3A92_eng.book 27 ページ 2010年12月9日 木曜日 午後9時0分

Advertising