Panasonic KV-S3065CW - Manual (Page 22)

22
Cleaning the Unit
∫ Outside of the scanner
≥ Clean the unit at least once a month.
1
Turn the power off.
2
Clean the cover with a soft cloth.
≥ The document insertion and exit slots get
dirty easily. Make sure to clean them.
3
Remove dirt and dust from the fan
exhaust vent with a brush.
∫ Inside the scanner
≥ Clean the unit at least once a week or when 20,000 sheets have been scanned, whichever comes first.
≥ Clean the rollers, sensors and double feed detectors if paper jamming or double feeding occurs frequently.
(Refer to pages 23–26 .)
≥ Clean the image sensor covers when black or white lines appear on the scanned images. (Refer to page 26 .)
≥ If the documents you are scanning are dirty, then the scanner parts will become dirty as well.
To maintain proper scanning, clean the scanner parts frequently.
≥ The image sensor covers may be very hot after scanning a lot of documents continuously.
Never touch the image sensor covers or surroundings directly.
∫ Roller cleaning paper
Open the bag on the dotted line and take out
the roller cleaning paper.
≥ If the bag is left open for a long period of time,
the alcohol will evaporate.
Please use the roller cleaning paper
immediately after opening the bag.
§ The roller cleaning paper (Model No. KV-SS03) is available from the dealer where you
purchased your scanner.
For supplies and accessories: Call 1-800-346-4768 (U. S. A. only) or your dealer.
± : off position
Power switch
Dotted line