Panasonic KV-S3065CW - Manual (Page 29)

Replacing Consumables
29
∫ Replacing retard roller module
7
Pull open the conveyor towards you by
using the indent on the right side.
≥ When the conveyor is pulled towards you,
the click-stop mechanism will be
released.
Caution:
When opening the conveyor, be careful not
get your finger stuck in the indent.
8
Pull the right side of the shaft in the
direction of the arrow and hold it there.
(
1)
Pull the retard roller module in the
direction of the arrow (
2) and then
remove it.
Indent
Conveyor
1
2
Retard roller module
Shaft