Panasonic KV-S3065CW - Manual (Page 34)

34
Specifications
Item
Model No.
KV-S3065CL KV-S3065CW
Scanner
Scanning face Duplex scanning
Scanning method
Front side : CIS (Contact Type Color Image Sensor)
Back side : CIS (Contact Type Color Image Sensor)
Scanning width 227 mm (8.9 in.) 302 mm (11.9 in.)
Readout speed
Simplex scanning :
Approx. 65 sheets/min. (Letter, fed lengthwise, 200 dpi)
Approx. 60 sheets/min. (A4, fed lengthwise, 200 dpi)
Duplex scanning :
Approx. 60 sheets/min. (Letter, fed lengthwise, 200 dpi)
Approx. 55 sheets/min. (A4, fed lengthwise, 200 dpi)
Resolution
Main scanning direction : 100~600 dpi (1 dpi step)
Sub-scanning direction : 100~600 dpi (1 dpi step)
(Same as main scanning direction)
The optical resolution is 600 dpi.
Tonal gradation
Binary mode, Grayscale mode (8 bit), 64-step gradation
(dither) mode, Error diffusion mode
Image control
Image emphasis, Dynamic threshold, Automatic separation,
Invert, White level from paper
Compression MH (G3), MR, MMR (G4), JPEG
Paper
Size* 48 k70 mm (1.9k2.75 in.) to 297k431 mm (11.7k17 in.)
Thickness
Single paper feeding : 0.025 to 0.2 mm (1.0 to 7.9 mils)
Continuous paper feeding : 0.06 to 0.2 mm (2.4 to 7.9 mils)
Note: 1 mil = 1/1000 in.
Weight
Single paper feeding : 20 to 157 g/m 2
(5.3 to 42 lbs.)
Continuous paper feeding : 40 to 157 g/m 2
(11 to 42 lbs.)**
Smaller than A7 size : 157 g/m 2
only
Hopper capacity
Smaller than Letter/A4 portrait : 300 sheets (64 g/m 2
) 17 lbs.
Wider than Letter/A4 portrait : 200 sheets (64 g/m 2
) 17 lbs.
Unit
External dimensions
(Width
kDepthkHeight)
495 k575k288 mm (19.5k22.7k11.4 in.)
Mass (Weight) 24 kg (53 lbs.)
Power requirement
AC100 – 120 V, 50/60 Hz
AC220 – 240 V, 50/60 Hz
Power
consumption
Maximum
(Scanning) 1.4 A (AC100 – 120 V)
0.6 A (AC220 – 240 V)
Minimum
(Standby) 0.6 A (AC100 – 120 V)
0.3 A (AC220 – 240 V)
Sleep mode
8 W (AC100 – 120 V)
8 W (AC220 – 240 V)
“Weight in pounds” of paper represents the weight of 500 [17 k22 inches (432k559 mm)] sheets.
* The scanning size depends on the memory installed in the scanner. Refer to PIE Reference Manual for details.
** For scanning thin paper (with paper weight less than 50 g/m 2
), the optional roller exchange kit for thin paper is
recommended.