Connecting using the component video output, About progressive scan video, Using this unit with a pioneer plasma display – Pioneer S-DV555T User Manual
Page 32: Other connections 09, Use a component video cable to connect the, Component video out, If you have a pioneer plasma display, You can use an sr+ cable
Other connections
09
32
En
Connecting using the
component video output
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV.
1
This should
give you the best quality picture from the three
types of video output available.
•
Use a component video cable to connect
the
COMPONENT VIDEO OUT
to a set of
component inputs on your TV.
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Compatibility of this player with
progressive-scan and high-definition TVs
This player is compatible with progressive
video Macro Vision System Copy Guard.
2
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display
3
, you can
use an SR+ cable
4
to connect it to this unit
and take advantage of various convenient
features, such as controlling this unit via the
plasma display's remote sensor, automatic
video input switching of the plasma display,
and automatic volume muting on the plasma
display.
Note
1 The component video output is switchable between interlaced and progressive formats. See
Video Output settings
on page 27.
AM LOOP
FM
UNBAL75 Ω
S-VIDEO
VIDEO
COMPONENT
VIDEO
C
R
/
P
R
C
B
/
P
B
Y
IN
ANTENNA
VIDEO OUT
CONTROL
MCACC
MIC
TV
COMPONENT
INPUT
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti-
facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
3 This system is compatible with all Pioneer plasma displays from 2003 onward.
4 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable.
AM LOOP
FM
UNBAL75 Ω
S-VIDEO
VIDEO
COMPONENT
VIDEO
C
R
/
P
R
C
B
/
P
B
Y
IN
ANTENNA
VIDEO OUT
CONTROL
MCACC
MIC
OUT
CONTROL
Pioneer plasma display
Media receiver
XV-DV353_555.book 32 ページ ２００６年４月７日 金曜日 午後６時１８分