Pioneer S-DV555T - Manual (Page 43)

Additional information 10
43
En
English
Français
Deutsch
Nederlands
Italiano
Español
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
• With the system on, press STANDBY/
ON while holding down USB.
The next time you switch on, all the system
settings should be reset.
Using the language code list
Some of the language options (see Language
settings on page 27) allow you to set your
preferred language from any of the 136
languages in the
Language code list below.
1 Select ‘Other Language’.
2 Use / to select either a code letter or
a code number.
3 Use / to select a code letter or a code
number.
See the Language code list (next page) for a
complete list of languages and codes.
ERR MIC • An error occured during MCACC setup because the microphone is not
connected or is not connected properly.
ERR SP • An error occured during MCACC setup because the speakers are not connected
or are not connected properly.
MUTING • An operation is prohibited because the sound is muted (press MUTE ).
STEREO • An operation is prohibited because the tuner is selected.
TRAYLOCK • The tray lock is on. See General in Troubleshooting on page 40.
KEY LOCK • The key lock is enabled. See Key lock setting on page 35.
PHONESIN • An operation is prohibited because the headphones are connected.
USB ERR • See Important in Using the USB interface on page 23 for more on this.
EEP ERR • Contact your Pioneer authorized service center or your dealer for servicing.
EXIT • Appears when a menu is automatically exited after a set period of inactivity.
Message Description
XV-DV353_555.book 43 ページ ２００６年４月７日 金曜日 午後６時１８分