Panasonic DMR-E51 - Manual (Page 28)

28
Recording from a video cassette player
When connected to the other equipment
[RAM] [DVD-R]
You can record audio and video being played on a video cassette player or a video camera connected to the input terminals.
Preparation
≥Before connecting any cables, first make sure that the power for both units is off.
Then after connecting any cable, turn on the both units.
≥Connect the other equipment to this unit’s input terminals (page 49).
≥Switch [DVD, TV] (15) to “DVD”.
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP or EP (page 19).
≥It is also possible to perform the flexible recording (FR) (page 20).
1 While stopped
Press [ W, X, CH] (18) or [INPUT SELECT] (29) to select the input channel for the equipment you have connected.
≥Select AV1, AV2 or AV3.
2 Start play on the other equipment.
3 Press [ ¥, REC] (16) at the point you want to start recording.
ªTo skip unwanted parts
Press [ ;] (8) to pause recording.
Press again to restart recording.
ªTo stop recording
Press [ ∫] (7).
Note
≥Stop play on the other equipment as well.
For your reference
≥Poor video quality or colouring may indicate that the material you are recording has copy protection.
≥Select the TV system (PAL/NTSC) of the programme you wish to record (page 53).
≥Any software that has been so treated cannot be recorded using this unit.
DVD(PAL).book 28 ページ ２００３年５月２２日 木曜日 午後１２時３分